Installation instruction manual - Stock Modular Units RO

(We can also prepare the foundation)

The installation instruction manual describes the proper operations for placing, connecting and transporting "Stock Units". The buyer is obliged to comply with the instructions. Failure to comply with these conditions will immediately void the unit warranty.

In addition, the buyer is responsible for being aware of all safety warnings that apply to the placement, connection and transportation of the unit.

Foundation for "Stock Units RO".

  1. The unit should be placed on a flat and stable surface, for example: a concrete foundation, stacked concrete blocks, stelcon plates or other suitable surface to support the unit. This should result in a surface that has little or no subsidence during the period of use, keeping the unit level at all times.
  2. The dimensions of the supports should be at least 50x50x5 cm. The size and depth of the foundation should be adapted to the local characteristics of the subsoil.
  3. The weight of a Stock Unit averages about 150 kg/m². Any foundation must be suitable to support this weight, taking into account the dimensions of the unit.
  4. At the bottom of this document you will find how many supports you should have per different unit sizes.

image.png

Examples of different foundations:

Foundation support points for all models:

Fundering_Layout_voor_Units_NL_with_full_dimensions.pdf

Foundation_Layout_for_Units_EN_with_full_dimensions.pdf

Fundering_Layout_voor_Units_RO_with_full_dimensions.pdf

Lifting and moving "Stock Modular Units".

  1. Lifting the unit is possible with a crane/truck. Therefore, "Stock Units RO" are equipped with at least 4 suspension eyes on top of the unit. To lift the unit safely, the angle between the lifting cables and the horizontal line must be at least 60 degrees.
  2. If the unit is equipped with additional suspension eyes, these additional eyes must be used when lifting the unit.
  3. Please note that; using a forklift to lift a unit will result in the loss of all warranties. Because the underside of the unit may be damaged during this process.